Wilson Benesch
Wilson Benesch
Wilson Benesch

News

Reviews

Distribution

Circle 25

"For vinyl lovers, it’s important to know that Wilson-Benesch first began in 1989 as a start-up dedicated to building a turntable simply because it felt vinyl was a superior medium compared to CD. For that reason alone, the company should be venerated. W-B argued that new, emerging technologies like carbon fibre could further elevate vinyl playback."

 

- Michael Fremer

Circle 25

In any design, ultimate high performance can only be attained when all the components have been optimised to work in harmony. Following this philosophy Wilson Benesch have taken all design and manufacturing in house to create the Circle 25 turntable. Using State of the Art Dassault CAD/CAM Systems, Wilson Benesch precision engineer each component in the Circle 25, within a tolerance of 0.01mm, to create a perfectly engineered masterpiece.

 

Forming the principle structural components of the Circle 25, the distinctive two-part Polyoxymethylene (POM) circular plinths replace the MDF plinths used in the original circle design. POM is a high-grade engineering homopolymer exhibiting superior stiffness and a higher damping coefficient.

 

The lower plinth houses the motor assembly, which is isolated from the upper plinth by three lossy polymer nodes. In turn, the upper plinth sees three alloy nodes meet with unidirectional carbon fibre cantilevers to create a unique sub-chassis suspension. The carbon fibre cantilevers are central to the success of the Circle 25 design. They exhibit exceptional stiffness and energy damping, providing a solid reference point for the platter and damping any structural borne resonance. This highly optimised design translates directly into the sonic presentation of the Circle 25, creating a wide-open soundstage, with the ‘blackness’ and solid quality to the analogue sound.

 

The final element is the bearing. The Circle 25 references the past to redefine the future. Taking elements of the original bearing design, the new bearing combines a hardened steel shaft and captive ball bearing, with a phosphor bronze bearing hub. With a highly polished surface finish, the bearing ensures the lowest possible level of friction and noise, while being phenomenally resistant to wear.

 

A turntable is purely a system of measurement, designed to allow a ~10nm (0.000001mm) cantilever tip to trace a ~50µm (0.05mm) groove in a piece of vinyl. By considering the microscopic level, it is then easy to appreciate the beauty of the Circle 25 design. What appears a simple design is in fact a complex and highly engineered analogue replay system.

Technology

EXPLORE THE FEATURES OF

 

 

 

 

 

BY CLICKING THE      ICONS

Robb Report WIRED magazine hi-fi+ Magazine Logo

Advanced materials used throughout.

Totally unique design concept.

Low mass design.

Immensely stiff unidirectional carbon fibre rods used in the principle structural components.

High tolerance phosphor bronze plain bearing with tool steel spindle.

Diameter: 305mm (12")

Stacked Height: 140mm (5.5")

Weight per Channel: 4kg (9 lbs) or 8kg (18 lbs) with stand

Machine finished polyoxymethylene plinths (black or white)

Colour coded, silk finish support hubs and casings

Machine finished translucent acrylic platter

explore

Circle 25

IN 3d

click an image to launch

Wilson Benesch Ltd | Falcon House  |  Limestone Cottage Lane | Sheffield  | United Kingdom  | T +44 (0)114 285 2656

 

Designed and Built by Wilson Benesch 2016  |  All rights reserved

Circle 25 Product Logo
Square Series 2 Square 5 floorstanding loudspeaker in Piano Black Gloss finishing

"For vinyl lovers, it’s important to know that Wilson-Benesch first began in 1989 as a start-up dedicated to building a turntable simply because it felt vinyl was a superior medium compared to CD. For that reason alone, the company should be venerated. WB argued that new, emerging technologies like carbon fibre could further elevate vinyl playback."

 

TURNTABLE

Square Series 2 Square 5 floorstanding loudspeaker finished in white gloss in a modern home interior

In any design, ultimate high performance can only be attained when all the components have been optimised to work in harmony. Following this philosophy Wilson Benesch have taken all design and manufacturing in house to create the Circle 25 turntable. Using State of the Art Dassault CAD/CAM Systems, Wilson Benesch precision engineer each component in the Circle 25, within a tolerance of 0.01mm, to create a perfectly engineered masterpiece.

Forming the principle structural components of the Circle 25, the distinctive two-part Polyoxymethylene (POM) circular plinths replace the MDF plinths used in the original circle design. POM is a high-grade engineering homopolymer exhibiting superior stiffness and a higher damping coefficient.

The lower plinth houses the motor assembly, which is isolated from the upper plinth by three lossy polymer nodes. In turn, the upper plinth sees three alloy nodes meet with unidirectional carbon fibre cantilevers to create a unique sub-chassis suspension. The carbon fibre cantilevers are central to the success of the Circle 25 design. They exhibit exceptional stiffness and energy damping, providing a solid reference point for the platter and damping any structural borne resonance. This highly optimised design translates directly into the sonic presentation of the Circle 25, creating a wide-open soundstage, with the ‘blackness’ and solid quality to the analogue sound.

The final element is the bearing. The Circle 25 references the past to redefine the future. Taking elements of the original bearing design, the new bearing combines a hardened steel shaft and captive ball bearing, with a phosphor bronze bearing hub. With a highly polished surface finish, the bearing ensures the lowest possible level of friction and noise, while being phenomenally resistant to wear.

A turntable is purely a system of measurement, designed to allow a ~10nm (0.000001mm) cantilever tip to trace a ~50µm (0.05mm) groove in a piece of vinyl. By considering the microscopic level, it is then easy to appreciate the beauty of the Circle 25 design. What appears a simple design is in fact a complex and highly engineered analogue replay system.

Technology

REVIEWS

"The imaging is calm and open, the background is black, and micro details are clear with a vengeance. An absolute must have!"

 

FINISHES

DESIGN

DIMENSIONS

FINISHES

Advanced materials used throughout.

Totally unique design concept.

Low mass design.

Immensely stiff unidirectional carbon fibre rods used in the principle structural components.

High tolerance phosphor bronze plain bearing with tool steel spindle.

Diameter: 305mm (12")

Stacked Height: 140mm (5.5")

Weight per Channel: 4kg (9 lbs) or 8kg (18 lbs) with stand

Machine finished polyoxymethylene plinths (black or white)

Colour coded, silk finish support hubs and casings

Machine finished translucent acrylic platter

SPECIFICATIONS

GALLERY

return to Analogue Collection

download brochure

download

manual

find your

closest dealer

return to top

Click an image and then swipe to view the gallery

Wilson Benesch Ltd | Falcon House  |  Limestone Cottage Lane | Sheffield  | United Kingdom  | T +44 (0)114 285 2656

 

Designed and built by Wilson Benesch 2016  |  All rights reserved